Simply Stop Rust, Inside And Out!
Do you want your vehicle protected while parked in the driveway or on the road to work? Do you live near the beach? Or, love nothing more than heading out of town… driving through sand and surf, boating with friends or travelling Australia by 4WD. That is pretty much everyone!
Protect your vehicle using Nilrust Electronic Corrosion Control Systems, from cars to the largest 4WD’s, even specialised farming and mining equipment. Know you are protected and use your vehicle without abusing it. Backed by 40 years of experience, NECCS rustproofing units STOP vehicle corrosion in the harshest conditions.
SIMPLY STOP RUST!
Australian made for Australian conditions
Computerised coupling technology
Maintenance free - subject to annual inspections
Transferable from vehicle to vehicle
Environmentally safe - no toxic sprays or chemicals used!
Covered by Nilrust warranty
Virtually indestructible, being water and dust proof
Does not interfere with the vehicle’s electronic systems and draws less than 30 milliamps
When a NECCS gives a green light, it’s a 100% guarantee the system is performing second to none
Covered by a 10 year warranty (conditions apply)
NECCS are manufactured in Australia for Nilrust by the market leader in this industry
Nilrust has combined state of the art ingredients with more than 30 years of tried and proven formulations to create the most technologically advanced range of car protection products available today. The NECCS (Nilrust Electronic Corrosion Control System) is a fully computerised device designed to prevent corrosion in vehicles. It does this by a process called capacitive coupling. Both a negative and electrostatic field are induced through the vehicle reducing the rate at which oxygen and the body steel combine. Corrosion is then reduced or stopped.
Electronic Rustproofing Technical Information.
How NECCS Works
What we are doing is interfering with the oxidization cycle, in other words, tricking nature.
We achieve this by artificially pumping electrons into the vehicle so our supply of electrons exceeds the demand.
This is achieved by creating a capacitor, our pad that is affixed to the paint acts as the positive plate in the capacitor, the paint becomes the dielectric which in turn holds the charge static (keeps the electrons from flowing away) and the body of the vehicle or structure acts as the negative plate in the capacitor.
So what we are left with is a big capacitor;
The pad is the positive plate
The paint is the dielectric
The body is the negative plate
Electrons are built between the positive plate and the negative plate and the paint keeps them there. How Simple!
Technology
There are 2 basic components for this technology.
1. The power supply or unit is approximately the size of a deck of playing cards and runs off the vehicle battery, drawing less than 30Ma. The electronic printed circuit board is totally encapsulated in an epoxy resin, which makes it completely airtight and watertight. As well as this the electronics are solid state, which means these systems will enjoy a long life in any condition.
2. The Capacitive Coupler or pad is affixed to a painted metal surface on the vehicle with an aircraft grade 3M adhesive. The power supply (unit) charges this pad with a predetermined DC voltage strong enough to be read on a volt/multi meter. There are three things that need to be supplied to the pad in order to induce the charge through the non-conductive painted surface, volts, frequency and capacitance.
NOTE: This is why you cannot run couplers in series off one circuit as other brands do.
We believe that the most important thing to remember when looking for an Electronic Rust Proofing system is to look at the field test evaluations, rather than the how’s and why’s. If it actually works in a corrosive environment, then it will work for you. However, we also need to satisfy those of you who want the how’s and why’s.
Beginning with a high precision signal generator, all aspects of the design are fully digitally controlled using state of the art microcomputer technology, similar to that found in current mobile phone technology.
The energy applied to the pad/s is tuned energy that is digitally monitored in a continuous feedback loop, again similar to that of a highly crafted and tuned musical instrument. The energy drawn from the battery is converted, tuned and passed with very high efficiency through the coupling pad/s to the vehicles body. This ‘through pads’ energy is greater than other similar brands.
NB: The above information is copyright to Couplertec the manufacturer of NECCS.